Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 84
drive, connect the audio cable, cables and, if it is a CD-ROM
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
CAUTION: Before completing the following step, note that the drive slides easily out of the drive cage. Do not allow the drive to strike a hard surface if it slides from the drive cage. Excessive shock can damage the drive. 5. With the drive rotated to its upright position, connect the drive power 1 and signal 2 cables and, if it is a CD-ROM drive, connect the audio cable 3. The other end of the audio cable 3 should be connected to audio connector on the expansion card cage. Connecting the Drive Cables Connecting the Audio Cable to Audio Connector on the Expansion Card Cage 4-24 Upgrading the Compaq Deskpro EN Series, Desktop Model
4-24
Upgrading the Compaq Deskpro EN Series, Desktop Model
CAUTION:
Before completing the following step, note that the
drive slides easily out of the drive cage. Do not allow the drive to
strike a hard surface if it slides from the drive cage. Excessive
shock can damage the drive.
5. With the drive rotated to its upright position, connect the
drive power
1
and signal
2
cables and, if it is a CD-ROM
drive, connect the audio cable
3
. The other end of the
audio cable
3
should be connected to audio connector on
the expansion card cage.
Connecting the Drive Cables
Connecting the Audio Cable to Audio Connector on the Expansion Card Cage