Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 54

hi-top screws on the right side. The screws take the place, of drive rails.

Get Compaq 470007-802 - Deskpro EN - 256 MB RAM PDF manuals and user guides View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

7. Pull the locking lever on the left side of the drive to the left (facing the front of the computer). Slide the drive to the rear of the bay, then lift the drive from the bay. Removing the Hard Drive (Shown from the Rear of the Chassis) ✎ When replacing the hard drive, transfer the four screws from the old drive to the new one. There are two shoulder-head screws on the left side of the drive and two hi-top screws on the right side. The screws take the place of drive rails. ✎ If you have installed a hard drive that is not automatically recognized by the computer, refer to Chapter 1, "Installation Guidelines." Making Hardware Changes 3-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
Making Hardware Changes
3-15
7.
Pull the locking lever on the left side of the drive to the left
(facing the front of the computer). Slide the drive to the
rear of the bay, then lift the drive from the bay.
Removing the Hard Drive (Shown from the Rear of the Chassis)
When replacing the hard drive, transfer the four screws
from the old drive to the new one. There are two
shoulder-head screws on the left side of the drive and two
hi-top screws on the right side. The screws take the place
of drive rails.
If you have installed a hard drive that is not automatically
recognized by the computer, refer to Chapter 1,
“Installation Guidelines.”