Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 85
B, Computer Setup Utilities, for more information.
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
6. Gently rotate the drive cage back into the computer chassis. CAUTION: When returning the drive cage to its normal position, use extreme caution to prevent damaging the data and power cables. 7. Remove the blank drive bezel from the inside of the front bezel. 8. Replace the computer cover. 9. Reconfigure the computer, if necessary. Refer to Appendix B, "Computer Setup Utilities," for more information. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. Installing a 3.5-Inch Drive into a 5.25-Inch Drive Bay 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, turn off the computer, disconnect the power cord from the electrical outlet, and remove the computer cover. Making Hardware Changes 4-25