Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 36
The primary 3.5-inch diskette drive should only
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
6. Install two guide screws on each side of the adapter 1. 7. Install the adapter in the desired drive bay 2 by sliding it into the front of the drive cage; the drivelock automatically secures the adapter when it snaps into place. ✎ The primary 3.5-inch diskette drive should only be installed into bay 3. Bay 3 is the bottom bay in the minitower configuration and the topmost bay in the desktop configuration. Aligning the Guide Screws and Installing an Adapter with a 3.5-Inch Drive 2-26 Upgrading the Compaq Deskpro EP Series
2-26
Upgrading the Compaq Deskpro EP Series
6. Install two guide screws on each side of the adapter
1
.
7. Install the adapter in the desired drive bay
2
by sliding it
into the front of the drive cage; the drivelock automatically
secures the adapter when it snaps into place.
The primary 3.5-inch diskette drive should only be
installed into bay 3. Bay 3 is the bottom bay in the
minitower configuration and the topmost bay in the
desktop configuration.
Aligning the Guide Screws and Installing an Adapter with a 3.5-Inch Drive