Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 80
Installing Additional Drives, You must install guide screws to ensure the drive will
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
16. Reconfigure the computer, if necessary. Refer Appendix B, "Computer Setup Utilities," for instructions about using Computer Setup. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. Installing Additional Drives When installing additional drives, follow these guidelines: s Use the green pull tabs to disconnect the diskette and hard drive cables from the drives. s For optimal performance, connect hard drives to the primary IDE controller. Connect expansion devices, such as IDE CD-ROM, tape, and diskette drives to the secondary controller. s You may install either a third-height or a half-height drive into a half-height bay. s You must install guide screws to ensure the drive will line up correctly in the drive cage. Compaq has provided extra guide screws, installed in the front of the computer chassis, under the front bezel. Some options use M3 metric thread hardware. The Compaq-supplied metric screws are black. 4-20 Upgrading the Compaq Deskpro EN Series, Desktop Model