Compaq 470007-802 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 26
Warning
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2. Remove the computer cover and locate the memory module sockets. ! WARNING: To reduce risk of personal injury from hot surfaces, allow the internal system components to cool before touching. 3. Open both latches of the memory module socket 1, and insert the memory module into the socket 2. Begin by installing a module into the socket nearest the preinstalled module, and install the modules following the numerical order of the sockets. A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. Push the module down into the socket, ensuring that the module is fully inserted and properly seated 3. Installing RIMM and CRIMMs All memory module sockets must be filled, either with a RIMM or with a CRIMM. 2-16 Upgrading the Compaq Deskpro EP Series