Compaq Evo n800c Maintenance and Service Guide - Page 125
Removing a MultiBay Device, Use the notch in the MultiBay device to slide the device
View all Compaq Evo n800c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Removal and Replacement Procedures 5. Remove the MultiBay device by following these steps: a. Turn the computer bottom side up with the right side facing forward. b. Slide and hold the MultiBay release latch toward the front of the computer 1 (Figure 5-4). c. Use the notch in the MultiBay device to slide the device out of the MultiBay 2. d. Remove the MultiBay device. Figure 5-4. Removing a MultiBay Device Reverse the above procedures to install a MultiBay device. 5-6 Maintenance and Service Guide
5–6
Maintenance and Service Guide
Removal and Replacement Procedures
5. Remove the MultiBay device by following these steps:
a.
Turn the computer bottom side up with the right side
facing forward.
b.
Slide and hold the MultiBay release latch toward the
front of the computer
1
(Figure 5-4).
c.
Use the notch in the MultiBay device to slide the device
out of the MultiBay
2
.
d.
Remove the MultiBay device.
Figure 5-4. Removing a MultiBay Device
Reverse the above procedures to install a MultiBay device.