Compaq Evo n800c Maintenance and Service Guide - Page 134
Connector Cover
View all Compaq Evo n800c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Removal and Replacement Procedures 5.7 Connector Cover ✎ The connector cover is available with silver finish for Presario 2800 models and carbon finish for Evo Notebook N800c, N800v, and N800w models. This cover is included in the Miscellaneous Plastics/Hardware Kit, spare part number 285261-001 for Presario 2800 models, and spare part number 286868-001 for Evo Notebook N800c, N800v, and N800w models. 1. Prepare the computer for disassembly (Section 5.3). 2. Turn the computer bottom side up with the rear panel facing forward. 3. Remove the two PM2.0 × 5.5 screws 1 that secure the connector cover to the base enclosure (Figure 5-12). 4. Open the connector cover. 5. Remove the connector cover from the base enclosure 2. Figure 5-12. Removing the Connector Cover Reverse the above procedure to install the connector cover. Maintenance and Service Guide 5-15