Compaq Evo n800c Maintenance and Service Guide - Page 166
Removing the System Board Screws, Remove the two PM2.0 × 8.0 screws
View all Compaq Evo n800c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Removal and Replacement Procedures 5. Remove the two PM2.0 × 5.5 screws 1 that secure the system board to the base enclosure on either side of the MultiBay connector (Figure 5-34). 6. Remove the two PM2.0 × 8.0 screws 2 that secure the system board to the base enclosure through the processor support bracket. Figure 5-34. Removing the System Board Screws Maintenance and Service Guide 5-47
Removal and Replacement Procedures
Maintenance and Service Guide
5–47
5.
Remove the two PM2.0 × 5.5 screws
1
that secure the system
board to the base enclosure on either side of the MultiBay
connector (Figure 5-34).
6.
Remove the two PM2.0 × 8.0 screws
2
that secure the system
board to the base enclosure through the processor support
bracket.
Figure 5-34. Removing the System Board Screws