Compaq Evo n800c Maintenance and Service Guide - Page 146
Removing the Top Cover Screws
View all Compaq Evo n800c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Removal and Replacement Procedures 3. Remove the nine PM2.0 × 8.0 screws 1 securing the top cover to the base enclosure (Figure 5-21). 4. Remove the PM2.0 × 4.0 screw 2 securing the top cover to the base enclosure in the hard drive bay. ✎ Do not remove the screw in the middle of the hard drive bay 3. Figure 5-21. Removing the Top Cover Screws 5. Turn the computer top side up with the rear panel facing forward. Maintenance and Service Guide 5-27
Removal and Replacement Procedures
Maintenance and Service Guide
5–27
3. Remove the nine PM2.0 × 8.0 screws
1
securing the top
cover to the base enclosure (Figure 5-21).
4. Remove the PM2.0 × 4.0 screw
2
securing the top cover to
the base enclosure in the hard drive bay.
✎
Do not remove the screw in the middle of the hard drive bay
3
.
Figure 5-21. Removing the Top Cover Screws
5. Turn the computer top side up with the rear panel facing
forward.