Compaq Evo n800c Maintenance and Service Guide - Page 151
Removing the Speaker Assembly, assembly to the top cover.
View all Compaq Evo n800c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Removal and Replacement Procedures 3. Route the drive activity light/battery power light cable and speaker cable out of the retaining clips in the top cover 1 and 2 (Figure 5-25). 4. Remove the strip of tape 3 that secures the speaker assembly and TouchPad cables to the top cover and TouchPad assembly. 5. Remove the PM2.0 × 4.0 screw 4 that secures the speaker assembly to the top cover. 6. Lift the speaker assembly straight up 5 and remove it from the top cover. Figure 5-25. Removing the Speaker Assembly Reverse the above procedure to install the speaker assembly. 5-32 Maintenance and Service Guide
5–32
Maintenance and Service Guide
Removal and Replacement Procedures
3. Route the drive activity light/battery power light cable and
speaker cable out of the retaining clips in the top cover
1
and
2
(Figure 5-25).
4.
Remove the strip of tape
3
that secures the speaker assembly
and TouchPad cables to the top cover and TouchPad
assembly.
5. Remove the PM2.0 × 4.0 screw
4
that secures the speaker
assembly to the top cover.
6. Lift the speaker assembly straight up
5
and remove it from
the top cover.
Figure 5-25. Removing the Speaker Assembly
Reverse the above procedure to install the speaker assembly.