D-Link DWS-3024 Product Manual - Page 128
Delete All, Manage, Submit, Acknowledge, All Access Points, Monitoring All Access Points, MAC Address
UPC - 790069288760
View all D-Link DWS-3024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
D-Link Unified Access System User Manual The font color for the AP listing indicates that the AP is one of the following types: • Green-Managed AP • Red-Failed AP • Gray-Rogue AP • Amber-Peer Managed AP You can manually delete status entries. To clear all APs from the All Access Points status page except Managed Access Points, click Delete All. To configure an Authentication Failed AP to be managed by the switch the next time it is discovered, select the check box next to the MAC address of the AP and click Manage. You will be presented with the Valid Access Point Configuration page. You can then configure the AP and click Submit to save the AP in the local Valid AP database. If you use a RADIUS server for AP validation, you must add the MAC address of the AP to the AP database on the RADIUS server. For more information, see Appendix B, "Configuring the External RADIUS Server" on page 207. To identify an AP as an Acknowledged Rogue, select the check box next to the MAC address of the AP and click Acknowledge. The switch adds the AP to the Valid AP database as an Acknowledged Rogue. To identify an AP as a rogue (again), select the check box next to the MAC address of the acknowledged AP and click UnAcknowledge.The switch deletes the AP from the Valid AP database. To view additional information about the detected AP, click the MAC address of the AP. Table 26 describes the fields on the All Access Points page. Table 26. Monitoring All Access Points Field MAC Address Location Switch Port IP Address Software Version Age Description Shows the MAC address of the access point. A location description for the AP. This is the value configured in the valid AP database (either locally or on the RADIUS server). The physical port (in the slot/port format) on the switch that the AP is connected to either directly or indirectly in the same L3 domain. If the AP is beyond the L3 network boundary, then 'Unknown' is displayed. The network address of the access point. Shows the version of D-Link Access Point software that the AP is running. Shows how much time has passed since the AP was last detected and the information was last updated. 128 © 2001- 2008 D-Link Corporation. All Rights Reserved.