D-Link DWS-3024 Product Manual - Page 208

D-Link Unified Access System User Manual Table 80. RADIUS Attributes for the Access Point RADIUS Server Attribute Vendor-Specific (26) Mode Vendor-Specific (26) Profile-ID Vendor-Specific (26) Switch-IP Vendor-Specific (26) Radio-1-Chan Vendor-Specific (26) Radio-2-Chan Vendor-Specific (26) Radio-1-Power Vendor-Specific (26) Radio-2-Power Description Indicates whether this AP is managed by the switch, by an administrator, or is a rogue AP. If AP is managed by a switch, the ID of the configuration profile for this AP. If there is more than one WS using this RADIUS server, indicates the IP address of the WS to managed this AP. Indicates a fixed channel for the radio. Indicates a fixed power setting for the radio. Indicates a fixed power setting for the radio. Range WS Managed (1) Standalone (2) Acknowledged Rogue (3) 1-16 Valid IP Address Valid channels depend on the regulatory domain (country-code) and the configured mode for that radio in the assigned AP profile. If the channel is not valid, its ignored. 0 indicates automatic channel assignment. 0, 1-100 percent 0 indicates automatic power assignment. 0, 1-100 percent 0 indicates automatic power assignment. Usage Required Required if mode is WS managed. Optional Optional, if defined and valid will override auto channel configuration Optional, if defined and valid will override auto power configuration Optional, if defined and valid will override auto power configuration When you do not require authentication between the APs and the RADIUS server, the switch uses the password "NOPASSWORD" in communications between the RADIUS client on the switch and the RADIUS server. The RADIUS client on the switch uses this password when it retrieves entries from the server. When you do require AP authentication, the password for AP authentication to the Unified Switch (separate from and in addition to AP authentication to the network) will be in this field. 208 © 2001- 2008 D-Link Corporation. All Rights Reserved.