D-Link DWS-3024 Product Manual - Page 138

D-Link Unified Access System User Manual Table 33 describes the fields you see on the VAPs page for the managed access point status. Table 33. Managed Access Point VAP Status Field MAC Address Location (Drop-down Menu) Radio (ex. 1-802.11g) VAP ID VAP Mode BSSID SSID Client Associations Client Authentications Description Shows the MAC address and location of the AP to which the values on the page apply. To view details about a different AP, select its MAC address from the drop-down menu. Indicates a radio interface and its configured mode. Select one of the radios to view VAP status for that radio. The integer ID used to identify the VAP (0-7), this is used to uniquely identify the VAP for configuration via CLI/SNMP. Indicates whether or not the VAP is enabled or disabled. VAPs are always configured, but are only sending beacons and accepting clients when they are Enabled. The Ethernet address of the VAP. Indicates the network assigned to the VAP. The network for each VAP is configured within the AP profile and the SSID is based on the network configuration. Indicates the total number of clients currently associated to the VAP. Indicates the total number of clients currently authenticated with the VAP. Monitoring Managed AP Statistics The managed AP statistics show information about traffic on the wired and wireless interface of the access point. This information can help diagnose network issues, such as throughput problems. Figure 62 shows the Managed Access Point Statistics page with two managed APs. Figure 62. Managed AP Statistics The following tabs are available from the Managed AP Statistics page: • WLAN Summary-Shows summary information about the wireless interfaces on each AP the switch manages. • Ethernet Summary-Shows summary information about the Ethernet (wired) interfaces on each AP the switch manages. 138 © 2001- 2008 D-Link Corporation. All Rights Reserved.