D-Link DWS-3024 Product Manual - Page 213
Configuring MAC Authentication
UPC - 790069288760
View all D-Link DWS-3024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Configuring the External RADIUS Server assignment and a newly associated client is assigned to the default VLAN for that VAP. A reauthenticating client retains its previous VLAN ID. The default management VLAN ID for all APs is 1. The only way to change an AP's management VLAN ID is by using the set management vlan-id command from the CLI. After you change the etc/raddb/users file, you must restart the RADIUS server daemon to apply the changes. Configuring MAC Authentication For each network, you can configure whether to use a local or RADIUS database for client MAC authentication. To use RADIUS-based MAC authentication for wireless clients, you add an entry for each client in the etc/raddb/users file. If the default action for MAC Authentication on the switch is set to "Allow," only clients that have an entry in the users file are allowed access to the network through the AP. If the default action is set to "deny" the clients with a MAC address in the users file cannot authenticate with the AP. The following line is an example of an entry for a client in the etc/raddb/users file. 00-0F-FE-1C-F2-67 Auth-Type: = Local, User-Password == "NOPASSWORD" NOTE: The password is always NOPASSWORD, and the MAC address of the client uses hyphens, not colons. FreeRADIUS Example for Wireless Client Configuration 213