D-Link DWS-3024 Product Manual - Page 88
Radio, Basic, Setup, Submit, Radio Settings, Radio Settings, State, Super A, Enabled
UPC - 790069288760
View all D-Link DWS-3024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
D-Link Unified Access System User Manual NOTE: The radio settings for the IEEE 802.11g radio are directly below the settings for the IEEE 802.11a radio.When the profile is applied to the DWL-3500AP, only the settings for the IEEE 802.11g radio are applied. Figure 38. Radio Settings The following table describes the fields you can configure from the Radio tab on the Basic Setup page. After you change the settings, click Submit to apply the settings. Table 9. Radio Settings Field State Super A Super G Description Specify whether you want the radio on or off by clicking On or Off. If you turn off a radio, the AP sends disassociation frames to all the wireless clients it is currently supporting so that the radio can be gracefully shutdown and the clients can start the association process with other available APs. Super A and Super G attempt to increases performance through bursting and frame compression. Performance increases when the AP communicates with Super A and Super G-enabled clients. However, with Super A and Super G enabled, the access point transmissions consume more bandwidth. • To enable Super A or Super G, select Enabled. • To disable Super A or Super G, select Disabled. • To enable Super A or Super G with Dynamic Turbo, select Enable with Dynamic Turbo. 88 © 2001- 2008 D-Link Corporation. All Rights Reserved.