D-Link DWS-3024 Product Manual - Page 205
Default D-Link Access Point Profile Settings
UPC - 790069288760
View all D-Link DWS-3024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
D-Link Unified Access System Default Settings Default D-Link Access Point Profile Settings Table 78 shows the AP settings for the default profile. By default, when a D-Link Access Point associates with the switch, the settings in this table are assigned to the AP upon successful AP validation. Table 78. AP Profile Default Settings Feature Radio Settings Radio (1 and 2) Radio 1 IEEE 802.11 Mode Radio 2 IEEE 802.11 Mode RF Scan Other Channels RF Scan Interval RF Scan Duration Super A/G Extended Range Automatic Channel Automatic Power Initial Power Load Balancing Load Utilization Maximum Clients RTS Threshold DTIM Period Fragmentation Threshold Beacon Period Rate Sets Supported (Mbps) Rate Sets (Mbps) (Basic/Advertised) Default On 802.11a NOTE: If the AP operates in a regulatory domain where 802.11a is not supported, the radio is disabled and no mode is configured. 802.11b/g Disabled 60 seconds 10 milliseconds Disabled Disabled Enabled Enabled 100 Disabled 60% 256 2347 bytes 10 beacons 2346 bytes 100 milliseconds IEEE 802.1a: 54, 48, 36, 24, 18, 12, 9, 6 IEEE 802.1g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 IEEE 802.1b: 11, 5.5, 2, 1 Atheros Dynamic Turbo 5 GHz: 108, 96, 72, 48, 36, 24, 18, 12 IEEE 802.1a: 24, 12, 6 IEEE 802.1g: 11, 5.5, 2, 1 IEEE 802.1b: 2, 1 Atheros Dynamic Turbo 5 GHz: 48, 24, 12 Default D-Link Access Point Profile Settings 205