Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 649
Dell Printer Configuration Web Tool., An SMTP server error occurred.
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 649 highlights
Status Code Status Code 027-444 027-445 027-446 027-447 027-452 027-500 027-501 027-502 027-503 027-504 027-513 027-514 027-515 Cause and Remedy [Cause] The IP address of IPv6 already exists. [Remedy] Change the [Auto Stateless Address 3] for IPv6 on the machine, or the IP address of IPv6 on the network device, to remove the duplication of addresses. [Cause] IP address for IPv6 set manually is incorrect. [Remedy] Set the IP address correctly. [Cause] The IP address of IPv6 set manually already exists. [Remedy] Change the [Manually Configured IPv6 Address] on the machine, or the IP address of IPv6 on the network device, to remove the duplication of addresses. [Cause] The IP address of IPv6 already exists. [Remedy] Change the [Link-local Address] for IPv6 on the machine, or the IP address of IPv6 on the network device, to remove the duplication of addresses. [Cause] IP address of IPv4 already exists. [Remedy] Change the IP address of IPv4 set on the machine or the IP address of IPv4 on the network device. [Cause] Unable to connect to the SMTP server. [Remedy] Specify the SMTP server name correctly or specify the server by using its IP address. [Cause] A POP server error occurred. [Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] Failed to log into the POP3 server when using the POP3 protocol. [Remedy] Confirm whether the user name and password used in the POP3 server are correct on Dell Printer Configuration Web Tool. [Cause] A POP server error occurred. [Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] An SMTP server error occurred. [Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] The machine failed to transfer data using SMB of the Scan to PC service because access to the SMB server was not permitted. When the server is Macintosh, a folder with the same name as the specified file name may exist on the server. [Remedy] Consult your system administrator for settings. [Cause] The machine failed to transfer data using SMB of the Scan to PC service because an error has been occurred between the SMB server and the DNS server. [Remedy] Check the following conditions: • The SMB server is connected to the DNS server. • The SMB server name is registered on the DNS server. [Cause] The machine failed to transfer data using SMB of the Scan to PC service because an error has been occurred. [Remedy] Take the following measures: • Set the DNS server address. • Set the target SMB server address using IP address. 649