Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 660
Wait for a while, and then execute the operation again., A dial tone was not detected.
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 660 highlights
23 Problem Solving Status Code 033-528 033-529 033-530 033-531 033-532 033-533 033-534 033-535 033-536 033-537 033-538 033-539 033-540 033-541 033-543 033-544 033-546 033-547 033-548 033-549 033-550 Cause and Remedy [Cause] An error occurred during fax transmission. [Remedy] Ask the sender to send again. [Cause] An error occurred during fax transmission. [Remedy] Confirm the other machine has a problem, and then execute the operation again. [Cause] Received a procedure disabled signal. [Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] Received a command rejection signal. [Remedy] Confirm the condition of the other machine (memory is full, paper has run out, or other conditions), and execute the operation again. [Cause] An error occurred during fax transmission. [Remedy] Execute the operation again. If receiving, ask the sender to send again. [Cause] The other machine does not offer a feature to print the number of document sets sent. [Remedy] Do not specify multiple sets. [Cause] An error occurred during fax transmission. [Remedy] Confirm information such as the recipient and folder information, and execute the operation again. [Cause] An error occurred during fax transmission. [Remedy] Execute the operation again. [Cause] An error occurred during fax transmission. [Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] The recipient is not specified. [Remedy] Specify the recipient correctly. [Cause] The recipient (fax number) is incorrect. [Remedy] Enter a correct fax number, and execute the operation again. [Cause] The recipient's line is busy. [Remedy] Wait for a while, and then execute the operation again. [Cause] A dial tone was not detected. [Remedy] Check whether the line is connected correctly. [Cause] Communication was terminated by a cause such as pressing the button. [Remedy] No measure is required. [Cause] Cannot transmit manually because a line is unavailable. [Remedy] Establish communication such as by telephone, and execute the operation again. [Cause] Cannot use the Fax service because of causes such as memory is insufficient. [Remedy] Wait for a while, and execute the operation again. [Cause] Cannot execute another job because fax communication is in progress. [Remedy] Wait until the job being communicated completes, and then execute the operation again. 660