Dell C7765DN Dell Color Multifunction Printer User's Guide - Page 680
Other Errors, Status Code, Cause and Remedy, Error, Message
View all Dell C7765DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 680 highlights
23 Problem Solving Status Code 133-710 149-310 149-700 Cause and Remedy [Cause] When printing the received fax document, the paper loaded on the bypass tray was used for printing because the specified tray could not be used. [Remedy] Take one of the following measures: • Load paper available for printing the received fax document: A3 SEF , A4 LEF , B4 SEF , B5 LEF , A4 SEF , A5 SEF , B5 SEF , 8.5 x 11" SEF , 8.5 x 13" SEF , 8.5 x 14" SEF , 11 x 17" SEF , 8.5 x 11" LEF , 5.5 x 8.5" SEF . • Use a paper type available for printing the received fax document: plain paper, bond paper, recycled paper, side 2 paper, user-defined custom paper. • Confirm the settings by selecting [Tools] > [System Settings] > [Fax Service Settings] > [Fax Control] > [Receiving Paper Size]. 1)Select [Receiving Paper Size] > [Tray Mode] to add a tray to be used for printing the received fax documents. 2)Set up paper so that the tray specified for [Tray Mode] can be used for printing the received fax documents. If the error still is not resolved, contact Customer Support at dell.com/contactdell. [Cause] The machine was turned off during the downloading. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch on the machine power. If the same message is displayed again, contact Customer Support at dell.com/contactdell. [Cause] The output destination was changed to the Finisher Output Tray although you selected the High Capacity Stacker. [Remedy] Check whether the specified paper is supported by the machine. Note • If you cannot resolve an error despite following the instructions described in the table, contact Customer Support at dell.com/contactdell. Other Errors This section describes the remedies when the following messages are displayed. Error Message Cause and Remedy A fault has occurred. Switch off the machine. (xxx-yyy) [Cause] An error occurred. [Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch the machine power on again. If the message persists, record the content displayed for [(xxx-yyy)]. Then immediately switch the main power and power off, make sure that the touch screen is blank, and then contact Customer Support at dell.com/contactdell. Completed with an error. (xxx-yyy) [Cause] An error occurred, and the operation terminated abnormally. [Remedy] Execute the operation again. A fault has occurred. The machine has rebooted. Select [Close]. If the problem persists, call for service. (xxx-yyy) [Cause] An auto-recoverable internal error occurred, and the machine restarted automatically. [Remedy] Select [Close] to use the machine normally. If the error still is not resolved, contact Customer Support at dell.com/contactdell. 680