Dell Inspiron 15 AMD Service Manual - Page 12

Camera Module Optional

Page 12 highlights

Back to Contents Page Camera Module (Optional) Dell™ Inspiron™ 1546 Service Manual Removing the Camera Module Replacing the Camera Module WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. Removing the Camera Module 1. Follow the procedures in Before You Begin. 2. Remove the display assembly (see Removing the Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Remove the display panel (see Removing the Display Panel). 5. Disconnect the camera cable from the connector on the camera module. 6. Remove the two screws that secure the camera module to the display cover. 7. Remove the camera module. 1 screws (2) 3 camera cable connector 2 camera module Replacing the Camera Module 1. Follow the procedures in Before You Begin. 2. Replace the two screws that secure the camera module to the display cover. 3. Connect the camera cable to the connector on the camera module. 4. Replace the display panel (see Replacing the Display Panel).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

Back to Contents Page
Camera Module (Optional)
Dell™ Inspiron™ 1546 Service Manual
Removing the Camera Module
Replacing the Camera Module
Removing the Camera Module
1.
Follow the procedures in
Before You Begin
.
2.
Remove the display assembly (see
Removing the Display Assembly
).
3.
Remove the display bezel (see
Removing the Display Bezel
).
4.
Remove the display panel (see
Removing the Display Panel
).
5.
Disconnect the camera cable from the connector on the camera module.
6.
Remove the two screws that secure the camera module to the display cover.
7.
Remove the camera module.
Replacing the Camera Module
1.
Follow the procedures in
Before You Begin
.
2.
Replace the two screws that secure the camera module to the display cover.
3.
Connect the camera cable to the connector on the camera module.
4.
Replace the display panel (see
Replacing the Display Panel
).
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
screws (2)
2
camera module
3
camera cable connector