Dell Inspiron 15 AMD Service Manual - Page 21

Before You Begin, Replacing the Mini, Replacing the Memory Modules, Replacing the Module Cover,

Get Dell Inspiron 15 AMD PDF manuals and user guides View all Dell Inspiron 15 AMD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

NOTE: The original thermal pad can be reused if the original processor and heat sink are reinstalled together. If either the processor or heat sink is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved. NOTE: This procedure assumes that you have already removed the processor heat sink and are ready to replace it. 1. Follow the procedures in Before You Begin. 2. Align the five captive screws on the processor heat sink with the screw holes on the system board and tighten the screws in sequential order (indicated on the processor heat sink). 3. Replace the Mini-Card (see Replacing the Mini-Card). 4. Replace the memory module(s) (see Replacing the Memory Module(s)). 5. Replace the module cover (see Replacing the Module Cover). 6. Replace the battery (see Replacing the Battery). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
1.
Follow the procedures in
Before You Begin
.
2.
Align the five captive screws on the processor heat sink with the screw holes on the system board and tighten the screws in sequential order (indicated
on the processor heat sink).
3.
Replace the Mini-Card (see
Replacing the Mini
-
Card
).
4.
Replace the memory module(s) (see
Replacing the Memory Module(s)
).
5.
Replace the module cover (see
Replacing the Module Cover
).
6.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
NOTE:
The original thermal pad can be reused if the original processor and heat sink are reinstalled together. If either the processor or heat sink is
replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved.
NOTE:
This procedure assumes that you have already removed the processor heat sink and are ready to replace it.
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.