Dell Inspiron 27 7710 All-in-One Service Manual - Page 23
System-board shield, Removing the system-board shield
View all Dell Inspiron 27 7710 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Steps 1. Align the screw holes on the hard drive with the screw holes on the hard-drive bracket. 2. Replace the four screws (M3x3.5) that secure the hard-drive bracket to the hard drive. 3. Slide the hard-drive assembly into the slot on the display-assembly base. 4. Replace the screw (M3x5) that secures the hard-drive assembly to the display-assembly base. Next steps 1. Install the back cover. 2. Install the stand. 3. Follow the procedure in After working inside your computer. System-board shield Removing the system-board shield Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the stand. 3. Remove the back cover. 4. Remove the I/O cover. About this task The following image indicates the location of the system-board shield and provides a visual representation of the removal procedure. Removing and installing components 23