Dell Inspiron 27 7710 All-in-One Service Manual - Page 46
Installing the power-button board
View all Dell Inspiron 27 7710 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Steps 1. Remove the five screws (M3x5) that secures the left-display hinge to the display-assembly base. 2. Remove the screw (M3x5) that secures the power-button board to the display-assembly base. 3. Peel the tape that secures the power-button board cable to the power-button board. 4. Gently lift the power-button board from the tabs on the display-assembly base. 5. Open the latch and disconnect the power-button board cable from the power-button board. 6. Lift the power-button board off the display-assembly base. Installing the power-button board Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image indicates the location of the power-button board and provides a visual representation of the installation procedure. 46 Removing and installing components