Dell Inspiron 27 7710 All-in-One Service Manual - Page 72
Table 8. System setup options-Connection menu, Intel Speed Shift Technology
View all Dell Inspiron 27 7710 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Table 8. System setup options-Connection menu Connection Network Controller Configuration Integrated NIC Enables or disables integrated NIC. Default: Enabled with PXE Wireless Device Enable WLAN Bluetooth Enable UEFI Network Stack HTTP(s) Boot Feature HTTP(s) Boot HTTP(s) Boot Feature Enable or disable internal WLAN devices. By default, WLAN is selected. Enable or disable internal Bluetooth devices. By default, WLAN and Bluetooth are selected. Enables or disables UEFI networking protocols, if they are installed and available. Default: Auto Enabled Enables or disables HTTP(s) boot. Default: ON Enables or disables HTTP(s) boot modes Default: Auto mode Table 9. System setup options-Power menu Power USB PowerShare Enable USB PowerShare Enables or disables USB PowerShare. Default: OFF USB Wake Support Enable USB Wake Support Enables or disables USB Wake Support. Default: ON AC Behavior AC Recovery Enables to recover the last power state. Default: Power Off Block Sleep Blocks the computer from entering Sleep (S3) mode in the operating system. Default: OFF NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will be disabled automatically, and the operating system power option will be blank if it was set to Sleep. Deep Sleep Control Deep Sleep Control Enable or disable the deep sleep control. Default: Disabled Intel Speed Shift Technology Enables or disables the Intel Speed Shift Technology support. Setting this option to enable allows the operating system to select the appropriate processor performance automatically. Default: ON 72 System setup