Dell Inspiron 27 7710 All-in-One Service Manual - Page 35

Installing the retractable-camera assembly, Fan, Removing the fan

Get Dell Inspiron 27 7710 All-in-One PDF manuals and user guides View all Dell Inspiron 27 7710 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Installing the retractable-camera assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image indicates the location of the retractable-camera assembly and provides a visual representation of the installation procedure. Steps 1. Slide and place the retractable-camera assembly on the display-assembly base. 2. Replace the two screws (M3x5) that secure the retractable-camera assembly to the display-assembly base. 3. Route the camera cable through the routing guide on the display-assembly base. 4. Adhere the tape that secures the camera cable to the display-assembly base. 5. Connect the camera cable to the system board. Next steps 1. Install the system-board shield. 2. Install the I/O cover. 3. Install the back cover. 4. Install the stand. 5. Follow the procedure in After working inside your computer. Fan Removing the fan Prerequisites 1. Follow the procedure in Before working inside your computer. Removing and installing components 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
Installing the retractable-camera assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image indicates the location of the retractable-camera assembly and provides a visual representation of the
installation procedure.
Steps
1.
Slide and place the retractable-camera assembly on the display-assembly base.
2.
Replace the two screws (M3x5) that secure the retractable-camera assembly to the display-assembly base.
3.
Route the camera cable through the routing guide on the display-assembly base.
4.
Adhere the tape that secures the camera cable to the display-assembly base.
5.
Connect the camera cable to the system board.
Next steps
1.
Install the
system-board shield
.
2.
Install the
I/O cover
.
3.
Install the
back cover
.
4.
Install the
stand
.
5.
Follow the procedure in
After working inside your computer
.
Fan
Removing the fan
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
Removing and installing components
35