Dell Inspiron 27 7710 All-in-One Service Manual - Page 36
Installing the fan, About this task, Steps, Prerequisites
View all Dell Inspiron 27 7710 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2. Remove the stand. 3. Remove the back cover . 4. Remove the I/O cover. 5. Remove the system-board shield. About this task The following image indicates the location of the fan and provides a visual representation of the removal procedure. Steps 1. Disconnect the fan cable from the system board. 2. Remove the fan cable from the routing guide on the display-assembly base. 3. Remove the three screws (M2x2.5) that secure the fan to the display-assembly base. 4. Lift the fan, along with its cable, off the display-assembly base. Installing the fan Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image indicates the location of the fan and provides a visual representation of the installation procedure. 36 Removing and installing components