Dell Inspiron 27 7710 All-in-One Service Manual - Page 47

Replace the five screws M3x5 that secures the left-display hinge to the display-assembly base.

Get Dell Inspiron 27 7710 All-in-One PDF manuals and user guides View all Dell Inspiron 27 7710 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Steps 1. Connect the power-button board cable to the power-button board and close the latch to secure the cable. 2. Align and place the power-button board in the slot on the display-assembly base and snap it into place. 3. Replace the screw (M3x5) that secures the power-button board to the display-assembly base. 4. Adhere the tape that secures the power-button cable to the power-button board. 5. Replace the five screws (M3x5) that secures the left-display hinge to the display-assembly base. Next steps 1. Install the system-board shield. 2. Install the I/O cover. 3. Install the back cover. 4. Install the stand. 5. Follow the procedure in After working inside your computer. Removing and installing components 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
Steps
1.
Connect the power-button board cable to the power-button board and close the latch to secure the cable.
2.
Align and place the power-button board in the slot on the display-assembly base and snap it into place.
3.
Replace the screw (M3x5) that secures the power-button board to the display-assembly base.
4.
Adhere the tape that secures the power-button cable to the power-button board.
5.
Replace the five screws (M3x5) that secures the left-display hinge to the display-assembly base.
Next steps
1.
Install the
system-board shield
.
2.
Install the
I/O cover
.
3.
Install the
back cover
.
4.
Install the
stand
.
5.
Follow the procedure in
After working inside your computer
.
Removing and installing components
47