Dell Inspiron 27 7710 All-in-One Service Manual - Page 57
Antennas, Removing the antennas
View all Dell Inspiron 27 7710 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Antennas Removing the antennas Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the stand. 3. Remove the back cover. 4. Remove the I/O cover. 5. Remove the hard drive. 6. Remove the system-board shield. 7. Remove the memory module. 8. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive, as applicable. 9. Remove the wireless card. 10. Remove the heat sink. 11. Remove the speakers. 12. Remove the system board. 13. Remove the media-card reader. 14. Remove the display hinges. 15. Remove the power-button board. About this task The following image indicates the location of the antennas and provides a visual representation of the removal procedure. NOTE: Note the routing of the antenna cables, before removing the antenna cables form the routing guides. Also, note the location of the antenna modules that are printed on the display-assembly base as ANT-B (black) and ANT-W (white). Steps 1. Remove the antenna cables from the routing guides on the display-assembly base. 2. Carefully peel the copper foil that secures the antenna cables (2) to the display-assembly base. 3. Lift the antenna modules off the display-assembly base. Removing and installing components 57