Dell OptiPlex GX200 Service Manual - Page 29
Table 2. System Board Connectors and Sockets - troubleshooting
View all Dell OptiPlex GX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
21 Diskette/tape-drive connector 22 Riser board connector 23 Real-time clock reset (RTCRST) jumper 24 Battery 25 Modem audio connector 26 Fan connector 27 CD audio cable connector System Board Jumpers Figure 15 shows the location of the jumpers on the system board. Table 1 lists the system board jumpers and their settings. Figure 15. System Board Jumpers Jumpers are small blocks on a circuit board with two or more pins emerging from them. Plastic plugs containing a wire fit down over the pins. The wire connects the pins and creates a circuit. NOTICE: Make sure your system is turned off before you change a jumper setting. Otherwise, damage to your system or unpredictable results may occur. To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated. Table 1. System-Board Jumper Settings Jumper PSWD SAFE BIOS RTCRST Setting (default) (default) (default) (default) (default) Description Password features are enabled. Password features are disabled. Reserved (do not change). Reserved (do not change). Real-time clock reset. Can be used for troubleshooting purposes. jumpered unjumpered System Board Labels Table 2 lists the labels for connectors and sockets on your system board, and it gives a brief description of their functions. Table 2. System Board Connectors and Sockets Connector or Socket AMC BATTERY Description ATI multimedia channel connector Battery socket