Dell OptiPlex GX200 Service Manual - Page 51
Mini Tower Chassis PCI/ISA Riser Board
View all Dell OptiPlex GX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
1 Auxiliary power indicator (AUX_LED) 2 PCI expansion slot 5 (PCI5) 3 Wake On LAN (WOL) connector 4 PCI expansion slot 1 (PCI1) 5 Auxiliary power connector Figure 23. Mini Tower Chassis PCI/ISA Riser Board 1 PCI expansion slot 1 (PCI1) 2 PCI expansion slot 2 (PCI2) 3 PCI expansion slot 3 (PCI3) 4 PCI expansion slot 4 (PCI4) 5 ISA expansion slot 1 (ISA1) 6 Standby power indicator LED (AUX_LED) 7 ISA expansion slot 4 (ISA4) 8 ISA expansion slot 3 (ISA3) 9 ISA expansion slot 2 (ISA2) 10 PCI expansion slot 5 (PCI5) 11 Remote Wakeup header (WOL) To remove a riser board, perform the following steps. NOTICE: To avoid possibly damaging expansion cards or the system board by ESD, ground yourself by touching an unpainted metal surface on the back of the computer. 1. Remove the expansion-card cage. 2. Remove the expansion cards installed in the slots. 3. Remove the screws securing the riser board to the expansion-card cage. System Board Components Figure 24 shows the system board and the location of all its sockets and connectors. Figure 24. System Board Components