Dell OptiPlex GX200 Service Manual - Page 37
Reinstall all components on the system board by performing steps 2 through 8 of the removal process
View all Dell OptiPlex GX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
7. Reinstall all components on the system board by performing steps 2 through 8 of the removal process in reverse. 8. Replace the computer cover. 9. Reset the chassis intrusion detector. While in System Setup, confirm that the system data area correctly identifies the type of microprocessor installed. Back to Contents Page
7.
Reinstall all components on the system board by performing steps 2 through 8 of the removal process in reverse.
8.
Replace the computer cover
.
9.
Reset the chassis intrusion detector
. While in System Setup, confirm that the system data area correctly identifies the type of microprocessor
installed.
Back to Contents Page