Dell PowerConnect 5324 User's Guide Addendum - Page 37
snmp-server host, show snmp, read write
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Table 1-9. SNMP Notification Recipients CLI Commands CLI Command Description snmp-server v3-host {ip-address | hostname} username [traps | informs] {noauth | auth | priv} [udp-port port] [filter filtername] [timeout seconds] [retries retries] Creates or updates a notification recipient receiving notifications in SNMP version 3. show snmp Shows the current SNMP configuration. The following is an example of the CLI commands: console (config)# snmp-server host 172.16.1.1 private console# show snmp Community-String Community-Access View name IP address ---------- public read only user-view All private read write default 172.16.1.1 private su DefaultSuper 172.17.1.1 37
37
The following is an example of the CLI commands:
snmp-server v3-host
{ip-
address
|
hostname
}
username
[
traps
|
informs
]
{
noauth
|
auth
|
priv
} [
udp-port
port
] [
filter
filtername
] [
timeout
seconds
] [
retries
retries
]
Creates or updates a notification recipient
receiving notifications in SNMP version 3.
show snmp
Shows the current SNMP configuration.
console (config)#
snmp-server host
172.16.1.1 private
console#
show snmp
Community-String
Community-Access
View name
IP address
---------------- ---------------- ---------
----------
public
read only
user-view
All
private
read write
default
172.16.1.1
private
su
DefaultSuper 172.17.1.1
Table 1-9.
SNMP Notification Recipients CLI Commands
CLI Command
Description