Dell PowerConnect 5324 User's Guide Addendum - Page 59

Displaying the MSTP Instance Table 1 Open the MSTP Settings page. 2 Click Show All to open the MSTP Instance Table. Figure 1-34. MSTP Instance Table Defining MST Instances Using CLI Commands The following table summarizes the equivalent CLI commands for defining MST instance groups as displayed in the MSTP Settings page. Table 1-16. MSTP Instances CLI Commands CLI Command spanning-tree mst configuration instance instance-id {add | remove} vlan vlan-range name string revision value spanning-tree mst instance-id portpriority priority spanning-tree mst instance-id priority priority spanning-tree mst maxhops hop-count spanning-tree mst instance-id cost cost exit Description Enters MST Configuration mode. Maps VLANs to the MST instance Sets the configuration name. Sets the configuration revision number Sets the priority of a port. Sets the device priority for the specified spanning tree instance. Sets the number of hops in an MST region before the BPDU is discarded and the information held for a port is aged. Sets the path cost of the port for MST calculations Exits the MST region configuration mode and applies configuration changes 59