Dell PowerConnect 5324 User's Guide Addendum - Page 7

Management IP Address, LLDP Port Table

Get Dell PowerConnect 5324 PDF manuals and user guides View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Optional TLVs - Contains a list of optional TLVs advertised by the port. For the complete list, see the Available TLVs field. Available TLVs - Contains a list of available TLVs that can be advertised by the port. The possible field values are: Port Description- Advertises the port description. System Name - Advertises the system name. System Description - Advertises the system description. System Capabilities - Advertises the system capabilities. Management IP Address - Indicates the management IP address that is advertised from the interface. The LLDP Port Table page displays the LLDP Port Configuration. To open the LLDP Port Table, click Security → LLDP → Port Settings → Show All in the tree view. Figure 1-3. LLDP Port Table Table 1-2. LLDP Port settings CLI Commands CLI Command Description clear lldp rx interface Restarts the LLDP RX state machine and clearing the neighbors table lldp optional-tlv tlv1 [tlv2 Specifies which optional TLVs from the ... tlv5] basic set should be transmitted lldp enable [rx | tx | both] To enable Link Layer Discovery Protocol (LLDP) on an interface. The following is an example of the CLI commands: 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
7
Optional TLVs
— Contains a list of optional TLVs advertised by the port. For the complete list, see the
Available TLVs
field.
Available TLVs
— Contains a list of available TLVs that can be advertised by the port. The possible field values
are:
Port Description
— Advertises the port description.
System Name
— Advertises the system name.
System Description
— Advertises the system description.
System Capabilities
— Advertises the system capabilities.
Management IP Address
— Indicates the management IP address that is advertised from the interface.
The
LLDP Port Table
page displays the LLDP Port Configuration. To open the
LLDP Port Table
, click
Security
→
LLDP
→
Port Settings
→
S
how All
in the tree view
.
Figure 1-3.
LLDP Port Table
Table 1-2.
LLDP Port settings CLI Commands
The following is an example of the CLI commands:
CLI Command
Description
clear lldp rx
interface
Restarts the LLDP RX state machine
and clearing the neighbors table
lldp optional-tlv
tlv1 [tlv2
… tlv5]
Specifies which optional TLVs from the
basic set should be transmitted
lldp enable
[rx | tx | both]
To enable Link Layer Discovery
Protocol (LLDP) on an interface.