Dell PowerStore 3200T EMC PowerStore Installation and Service Guide for PowerS - Page 107
Install the M.2 boot module adaptor
View all Dell PowerStore 3200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Figure 125. Removing the internal M.2 boot modules from the M.2 boot module adaptor Install the M.2 boot module adaptor Steps 1. Place the internal M.2 boot modules that you removed from the faulted M.2 boot module adaptor into the new M.2 boot module adaptor. NOTE: The side of the internal M.2 boot module with the barcodes should be facing up. 2. Align the blue tab on the replacement internal M.2 boot module with the slot on the M.2 boot module adaptor and gently push it into place. 3. Connect the pull tab to the blue adapter. Figure 126. Installing the internal M.2 boot modules into the M.2 boot module adaptor 4. Touching only the outside edges of the M.2 boot module adaptor, align the M.2 boot module adaptor with the connector. 5. Firmly push the M.2 boot module adaptor straight down into the connector. When the M.2 boot module adaptor is fully seated, you will hear a snap, and feel the connector latches click into place. Base enclosure service procedures 107