Dell PowerStore 3200T EMC PowerStore Installation and Service Guide for PowerS - Page 124
Return a faulted part, Replace a link control card in a SAS expansion enclosure
View all Dell PowerStore 3200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
The status of the replacement drive should read Healthy. If the status is still Faulted, wait a few minutes and refresh PowerStore Manager. If the status does not change, ensure that the drive is correctly seated, or contact your service provider. 4. Click Stop Blink LED. Return a faulted part About this task For US customers, return defective material within five business days. For International customers, return defective material within 10 business days. The materials required to return your defective part are supplied with the good part shipment. Steps 1. Package the faulted part in the shipping box that contained the replacement part. 2. Ship the failed part to your service provider as described in the instructions that were included with the replacement part. 3. For more information about returning customer-replaceable parts: a. Open PowerStore Manager. b. Click Settings on the upper right of the screen. c. Click General Support. d. Under Drives, Power Supplies, and Other Parts, click Return Part. e. If your screen does not show the Return Part link, contact your service provider for instructions. Replace a link control card in a SAS expansion enclosure Take the following actions to remove a faulted link control card (LCC) from a SAS expansion enclosure and install a replacement LCC. Identify a faulted LCC from PowerStore Manager Before you replace an LCC, ensure that you have identified its location within the system. Using PowerStore Manager, you can identify and locate a faulted LCC. Steps 1. From PowerStore Manager, select Hardware. 2. Select the appliance that contains the LCC that you need to replace. 3. On the Components card, under Rear View, expand ExpansionEnclosure. 4. Select the relevant LCC. Faulted parts appear in red in the image of the system, and report a status of Faulted in the State field. Removing a faulted LCC Prerequisites Identify the faulted LCC by it amber fault LED. 124 SAS expansion enclosure service procedures