Dell PowerStore 3200T EMC PowerStore Installation and Service Guide for PowerS - Page 17
Install the rails in the cabinet, Prying off a latch bracket, Installing the rails
View all Dell PowerStore 3200T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CL4064 Figure 5. Prying off a latch bracket Install the rails in the cabinet This task describes the procedure to install one rail. After installing one rail, repeat the procedure for the other rail. The procedure is the same for both the left and right rail. You can install the rails into either a square or round hole rack. Steps 1. Position the rail end piece so the label FRONT is located at the front of the rack and facing towards the inside of the rack, while orienting the rear of the rail to align level with the holes on the rear of the rack. 2. From the rear of the rack, pull the rail straight back until the latch is locked. 3. To install the front end piece of the rail, press the blue latch release button until the latch rotates open. 4. Pull the rail forward until the pins slide into the holes on the front of the rack, then release the latch to secure the rail in place. Figure 6. Installing the rails 5. Repeat for the other rail. Install a new base enclosure and optional expansion enclosure 17