Dell XPS 630i Owner's Manual - Page 87
Clearing CMOS Settings
View all Dell XPS 630i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Clearing CMOS Settings CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. 1 Follow the procedures in "Before You Begin" in the Service Manual on the Dell Support website at support.dell.com. NOTE: The computer must be disconnected from the electrical outlet to clear the CMOS setting. 2 Remove the computer cover (see "Removing the Computer Cover" in the Service Manual on the Dell Support website at support.dell.com). 3 Locate the 3-pin CMOS jumper on the system board (see "System Board Components" in the Service Manual on the Dell Support website at support.dell.com). 4 Move the 3-pin jumper plug from pins 3 and 2 to pins 1 and 2. 5 Wait five seconds for the CMOS to clear. 6 Move the 2-pin jumper plug back to pins 3 and 2. 7 Replace the computer cover (see "Replacing the Computer Cover" in the Service Manual on the Dell Support website at support.dell.com). NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer. 8 Connect your computer and devices to electrical outlets, and turn them on. Clearing Passwords and CMOS Settings 87