Dell XPS M1530 Owner's Manual - Page 134
Center Control Cover and Hinge Covers
View all Dell XPS M1530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Center Control Cover and Hinge Covers CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer. Removing the Center Control Cover and Hinge Covers 1 Follow the procedures in "Before You Begin" on page 129. 2 Turn the computer over and remove the three M2 x 2-mm screws that secure the center control cover. 3 Turn the computer top side up, and open the display as far as it will open. 4 Ease the center control cover up with a plastic scribe until you see the cable connector that attaches the cable to the system board. NOTICE: While raising the center control cover ensure that you do not pull hard so as not to damage the data cable connected to the system board. The cover along with the cable that attaches to it are very fragile. 134 Adding and Replacing Parts