Dell XPS M1530 Owner's Manual - Page 144
Replacing a WLAN Card, board connector labeled WLAN.
View all Dell XPS M1530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
5 Release the WLAN card by removing the securing screw. 6 Lift the WLAN card out of its system board connector. Replacing a WLAN Card NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card. NOTICE: To avoid damage to the WLAN card, never place cables under the card. 1 Insert the WLAN card connector at a 45-degree angle into the system board connector labeled "WLAN". 2 Press the other end of the WLAN card down into the slot on the system board until the card clicks into place. 3 Replace the M2 x 3-mm securing screw. 144 Adding and Replacing Parts
144
Adding and Replacing Parts
5
Release the
WLAN
card by removing the securing screw.
6
Lift the
WLAN card
out of its system board connector.
Replacing a WLAN Card
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the card and on the system board, and realign
the card.
NOTICE:
To avoid damage to the WLAN card, never place cables under the card.
1
Insert the
WLAN
card connector at a 45-degree angle into the system
board connector labeled "WLAN".
2
Press the other end of the
WLAN
card down into the slot on the system
board until the card clicks into place.
3
Replace the M2 x 3-mm securing screw.