Denon AVR 1906 Owners Manual - Page 19

Connecting Other Sources Connecting the MULTI ZONE terminals For instructions on operations using the MULTI ZONE functions ( page 35~37). ZONE2 out connections • If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 out (variable/fixed level) terminals can be used to play a different program source in ZONE2 the same time ( page 35, 36). • When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit. ENGLISH Connecting Other Sources ZONE2 speaker out connections • When the power amplifier is assigned to the ZONE2 output channel at "Power Amp Assign." in the "System Setup" menu, the surround back speaker terminals can be used as the ZONE2 speaker out terminals ( page 36). • The connections diagram below is an example for when the surround back speaker is assigned to the ZONE2 stereo 2 channel. In this case, surround back speaker out can not be used for MAIN ZONE. Center speaker Subwoofer Surround speaker systems A (Variable) L R A (Fixed) L R Power amplifier (ZONE2) L L IN R R Power amplifier (ZONE2) L L IN R R >< IN Connection terminal for subwoofer with built-in amplifier (subwoofer), etc. (L) (R) > < RC-617 INFRARED SENSOR + + AUX OUT OUTPUT INPUT RC-616 INFRARED RETRANSMITTER Extension terminals for future use. NOTE: • For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions. (L) (R) >< Front speaker systems (B) (L) (R) >< Front speaker systems (A) 16 ENGLISH (L) (R) > < ZONE2 speaker systems NOTE: • The settings must be changed to use this speaker for ZONE2 ( page 44).