Denon AVR 1906 Owners Manual - Page 30

ENGLISH Basic Operation Basic Operation SURROUND MODE TONE CONTROL SURROUND PARAMETER SELECT TONE DEFEAT DSP surround simulation 2 To operate the surround mode and the surround parameters from the remote control unit 1 Select the surround mode for the input channel. (Remote control unit) The surround mode switches in the following order each time the DSP SIMULATION button is pressed: MONO MOVIE ROCK ARENA MATRIX VIDEO GAME JAZZ CLUB 2 Press the SURROUND PARAMETER button to enter the surround parameter setting mode. The surround parameter switches in the following order each time the SURROUND PARAMETER button is pressed for the different surround modes. SURROUND MODE CH SELECT / ENTER SURROUND PARAMETER CURSOR 3 Press the SURROUND PARAMETER button, and press the CURSOR D or H button to select the various parameters. 4 Press the CURSOR F or G button to adjust the parameter settings. 5 Press the ENTER button to finish the surround parameter mode. • When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed. 2 Operating the surround mode and the surround parameters from the main unit's panel 1 Turn the SELECT knob to select the surround mode. When turned clockwise: DIRECT STEREO DOLBY PRO LOGIC IIx MONO MOVIE 5CH/7CH STEREO DTS NEO:6 ROCK ARENA JAZZ CLUB VIDEO GAME VIRTUAL SURROUND MATRIX When turned counterclockwise: DIRECT STEREO DOLBY PRO LOGIC IIx MONO MOVIE 5CH/7CH STEREO DTS NEO:6 ROCK ARENA JAZZ CLUB VIDEO GAME VIRTUAL SURROUND MATRIX To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the SURROUND MODE button, then operate the selector. 2 Press and hold in the SURROUND PARAMETER button to select the parameter you want to set. The parameters which can be set differ for the different surround modes are displayed. (Refer to "Surround modes and parameters" ( page 57).) 3 Display the parameter you want to adjust, then turn the SELECT knob to set it. • When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed. 2 Surround parameters r ROOM SIZE: This sets the size of the sound field. There are five settings: "small", "med.s" (medium-small), "medium", "med.l" (medium-large) and "large". "small" recreates a small sound field, "large" a large sound field. EFFECT LEVEL: This sets the strength of the surround effect. The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted. DELAY TIME: The delay time can be set within the range of 0 to 110 ms only in the matrix mode. TONE CONTROL: This can be set individually for each surround mode except DIRECT. 27 ENGLISH