Denon AVR 1906 Owners Manual - Page 32

ENGLISH Basic Operation FUNCTION BAND PRESET POWER ON/STANDBY SHIFT TUNING TUNER MODE MEMORY ON SCREEN TUNING PRESET SHIFT BAND Listening to the radio Auto preset memory • This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory. • The "Auto tuner preset" operation can also be performed at "System setup" ( page 42). Hold the PRESET • button and press the POWER switch on the main unit. • The unit automatically begins searching for FM broadcast stations. When the first FM broadcast station is found, that station is stored in the preset memory at channel A1. Subsequent stations are automatically stored in order at preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to F8 and G1 to G8 for a maximum of 56 stations. Channel A1 is tuned in after the auto preset memory operation is completed. 2 DEFAULT SETTINGS A1 ~ A8 B1 ~ B8 C1 ~ C8 D1 ~ D8 E1 ~ E8 F1 ~ F8 G1 ~ G8 Auto tuner presets 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 MHz 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, 90.1 / 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz Auto tuning Basic Operation 1 Set the input source to "TUNER". (Main unit) (Remote control unit) 2 Watching the display, press the BAND button to select the desired band (AM or FM). 3 Press the MODE button to set the auto tuning mode. 4 Press the TUNING (+) or (-) button. Automatic searching begins, then stops when a station is tuned in. • When in the auto tuning mode on the FM band, the "STEREO" indicator lights on the display when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the "TUNED" and "STEREO" indicators turn off. • If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it using the manual "Preset memory" operation. • To interrupt this function, press the ON/STANDBY switch. 29 ENGLISH