Denon AVR-3805 Owners Manual - Page 15
Speaker system connections - multi zone
UPC - 081757505987
View all Denon AVR-3805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Speaker system connections • Connect the speaker terminals with the speakers making sure that like polarities are matched (≈ with ≈ , √ with √ ). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the stereo being impaired. • When making connections, take care that none of the individual conductors of the speaker cord come in contact with adjacent terminals, with other speaker cord conductors, or with the rear panel. NOTE: NEVER touch the speaker terminals when the power is on. Doing so could result in electric shocks. Speaker Impedance • Speakers with an impedance of from 6 to 16 Ω/ohms can be connected for use as front and center speakers. • Speakers with an impedance of 6 to 16 Ω/ohms can be connected for use as surround speakers. • Be careful when using two pairs of surround speakers (A + B) at the same time, since use of speakers with an impedance of less than 8 Ω/ohms will lead to damage. • The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower than the specified impedance are connected. 1. Loosen by turning counterclockwise 2. Insert the cord. Connection the speaker terminals 3. Tighten by turning clockwise. Either tightly twist or terminate the core wires. Connecting banana plugs banana plug Turn clockwise to tighten, then insert the banana plug. Connections • When making connections, also refer to the operating instructions of the other components. Connection jack for subwoofer with built-in amplifier (super woofer), etc. FRONT SPEAKER SYSTEMS CENTER SPEAKER SYSTEM SURROUND SPEAKER SYSTEMS (A) (L) (R) (L) (R) • Precautions when connecting speakers If a speaker is placed near a TV or video monitor, the colors on the screen may be disturbed by the speaker's magnetism. If this should happen, move the speaker away to a position where it does not have this effect. NOTES: • To use Surround back with one speaker, connect the speaker to SURR. BACK L CH. • The settings must be changed to use this speaker for ZONE2/ZONE3. (L) (R) See page 45. SURROUND BACK/MULTI ZONE SPEAKER SYSTEMS (L) (R) SURROUND SPEAKER SYSTEMS (B) 15