Denon AVR-3805 Owners Manual - Page 64
Example: Stereo, Input mode display, Input signal display - instruction manual
UPC - 081757505987
View all Denon AVR-3805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
3 Select the play mode. Example: Stereo Input mode display • In the AUTO mode Depending on the input signal. (Remote control unit) (Remote control unit) (Main unit) 4 Start playback on the selected component. • For operating instructions, refer to the component's manual. 5 Adjust the volume. MASTER VOLUME • In the DIGITAL PCM mode • In the DIGITAL DTS mode • In the ANALOG mode • In the EXT.IN mode The volume level is displayed on the master volume level display. (Remote control unit) (Main unit) The volume can be adjusted within the range of -80 to 0 to 18 dB, in steps of 0.5 dB. However, when the channel level is set as described on page 34~36 or pages 72 and 73, if the volume for any channel is set at +0.5 dB or greater, the volume cannot be adjusted up to 18 dB. (In this case the maximum volume adjustment range is "18 dB - (Maximum value of channel level)".) Input mode when playing DTS sources • Noise will be output if DTS-compatible CDs or LDs are played in the "ANALOG" or "PCM" mode. When playing DTS-compatible sources, be sure to connect the source component to the digital input jacks (OPTICAL/COAXIAL) and set the input mode to "DTS". Input signal display • DOLBY DIGITAL • DTS • PCM Depending on the input signal. • The DSD indicator lights when the DENON LINK have been connected and the DSD signals have been inputted. (See page 14) Depending on the input signal. • The HDCD indicator lights when digital signals are being input with a player that supports HDCD playback. The DIG. indicator lights when digital signals are being input properly. If the DIG. indicator does not light, check whether the digital input component setup (page 39) and connections are correct and whether the component's power is turned on. AL24 processing is activated when PCM signals are played while the surround mode is set to PURE DIRECT, DIRECT, STEREO, MULTI CH DIRECT or MULTI CH IN. NOTE: • The DIG. indicator will light when playing CD-ROMs containing data other than audio signals, but no sound will be heard. 64