Denon AVR-3805 Owners Manual - Page 81

DSP surround simulation 1 Select the surround mode for each input channel. (Remote control unit) (Remote control unit) (Main unit) The surround mode switches in the following order each time the DSP SIMULATION button is pressed: WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB VIRTUAL MATRIX VIDEO GAME MONO MOVIE CLASSIC CONCERT 2 Press the surround patameter button. Display the surround parameter screen. 1 The screen for the selected surround mode appears. 1 3 2, 4 (Remote control unit) (Main unit) 1 *Surr Parameter ROOM: Medium 3 Set the parameters. CH SEL ENTER CH SEL ENTER (Remote control unit) CH SEL ENTER (Remote control unit) 4 (Main unit) CH SEL ENTER (Main unit) If the setting mode ends, press the surround parameter button again. 2,4 3 (Remote control unit) (Main unit) NOTES: • The surround speaker setting can also be changed with the SPEAKER button on the remote control unit. • When "Default" is selected and the 0 courser button is pressed, "CINEMA EQ." and "D.COMP." are automatically turned off, "ROOM SIZE" is set to "medium", "EFFECT LEVEL" to "10", "DELAY TIME" to "30ms" and "LFE" to "0dB". • The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual size of the listening room. • When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II, DOLBY PRO LOGIC IIx, DTS NEO:6 modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround. 81