Denon AVR-3805 Owners Manual - Page 71
] Outputting a program source to an amplifier, etc., in a different room ZONE2, ZONE3 mode
UPC - 081757505987
View all Denon AVR-3805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
[1] Outputting a program source to an amplifier, etc., in a different room (ZONE2, ZONE3 mode) 1 Press the "ON" button. 3 2 Press the ZONE2/3/REC button. The display switches as follows each time the button is pressed. ZONE2 (RECOUT) ZONE3 3 With "ZONE2 SOURCE" displayed, turn the FUNCTION knob and select the source you wish to output. • The display switches the selected source. (Main unit) (Main unit) (Main unit) 4 Start playing the source to be output. • For operating instructions, refer to the manuals of the respective components. • ZONE3 can also be set with a method similar to the above. 21 FUNCTION ZONE2 SOURCE NOTES: • The signals of the source selected in the ZONE2 mode are also output from the VCR-1, VCR-2 and CDR/TAPE recording output jacks. • Digital signals are not output from the ZONE3, audio (FIXEDOUT) output jacks and ZONE2 audio output jacks. • Refer to page 69, 70 about the MULTI ZONE connections. [2] Remote control unit operations during multi-source playback (selecting the input source) This operation is not possible in the REC OUT mode. 1 Select "ZONE2" using the ZONE2/ZONE3 button. (Remote control unit) 2 2 Press the "SOURCE ON" button. 1 To turn off the ZONE2 mode, press the ZONE2 "SOURCE OFF" button. (Remote control unit) 3 Press the input source button • The ZONE2 source switches directly. 4 The output level of the ZONE2 OUT terminals can be controlled using the VOLUME + and - buttons on the remote control unit. The output level of ZONE2 OUT can be controlled only if ZONE2 vol. level is set (Remote control unit) "Variable" at Zone2 Control in System Setup Menu. (see page 45,46) DEFAULT SETTING (ZONE2 VOLUME LEVEL) : - - - dB (MINIMUM) 5 When the ZONE2 SOURCE function is set to TUNER, the preset channel can be selected using the CHANNEL + and - buttons on the remote control unit. (Remote control unit) • ZONE 3 can also be set with a method similar to the above. 5 4 NOTE: • The main zone output can be turn on and off "SOURCE ON/OFF"button (AMP mode) 71