Denon AVR-3805 Owners Manual - Page 74

3 Set the surround parameter mode. (Remote control unit) (Main unit) *Surr Parameter MODE: PLIIx C The on-screen display differs according to whether the operation is performed from the main unit or the remote control unit. 4 Select the play mode. CH SEL ENTER CH SEL ENTER NOTE: • The PLIIx mode is set when the "SB CH OUT" surround parameter is set to "ON", and the PLII mode is set when this parameter is set to "OFF". (Remote control unit) (Main unit) • When the "SB CH OUT" parameter is set to "ON".(Set "SP.Back" at the system set up to "1spkr" or "2spkr"). Display *Surr Parameter MODE: PLIIx C (Pro LogicIIx Cinema mode) *Surr Parameter MODE: PLIIx M (Pro LogicIIx Music mode) *Surr Parameter MODE: PLIIx G (Pro LogicIIx Game mode) • When the "SB CH OUT" parameter is set to "OFF".(Set "SP.Back" at the system set up to "None"). Display *Surr Parameter MODE: PLII C (Pro LogicII Cinema mode) *Surr Parameter MODE: PLII M (Pro LogicII Music mode) *Surr Parameter MODE: PLII G (Pro LogicII Game mode) *Surr Parameter MODE: DOLBY PL (Dolby Pro Logic mode) 5 Select the parameter to change. (See "Surround parameters q" for a description of each parameter.) CH SEL ENTER CH SEL ENTER (Remote control unit) (Main unit) When set with the on-screen display using the remote control unit while in the MUSIC mode, set the " " mark to "OPTION 0" using the D and H cursor buttons, then press the F cursor button. Press the ENTER button to return to the previous screen. 6 Set the various surround parameters. CH SEL ENTER CH SEL ENTER (Remote control unit) (Main unit) Ex : DOLBY PLIIx music mode screen. 7 If the setting ends, press the "ENTER" or "SURROUND PARAMETER" button. NOTE: • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The AVR-3805 sets the mode automatically according to the types of speakers set during the system setup process (page 32). 74