Denon AVR-3805 Owners Manual - Page 56
Learning function - accessories
UPC - 081757505987
View all Denon AVR-3805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Learning function If your AV component is not a Denon product or if it cannot be operated using the preset memory, it can be controlled with the accessorious remote control unit by storing its remote control signals in the remote control unit. For some remote control signals it is not possible to "learn" the signals or the device will not operate properly. In such cases use the remote control unit included with the device to operate it. 1 Press the power ON button and the OFF button simultaneously. 1, 8 2 Press the "2" button to select Learning setup. 3, 7 2 3 Press the Mode button for the component you want to learned, then press the ENTER button. Learning is not possible for the AMP, ZONE2, and ZONE3 modes. CH SEL ENTER 3 4 Buttons that allow learning will light. Press the button that you wish to be learned. The display will go off and the unit will enter the learning standby mode. • To cancel, press the power ON button and the OFF button simultaneously. 5 Point the remote control units directly at each other and press and hold in the button on the other remote control unit which you want to "learn". Other remote control unit 6 "OK" appears on the remote control unit's display and learning is completed. • Other keys can be "learned" by repeating steps 5 to 6. • "FAIL" appears on the remote control unit's display, repeating steps 4 to 6. 7 The mode can be switched by pressing a mode selector button. The "Buttons that allow learning" display reappears and the learning standby mode is set. 8 To cancel the learning mode, press the power ON button and the OFF button simultaneously again. 56